IKA - VC 10 Digital Vacuum Controller

Vacuum controller

VC 10 Vacuum controller

Universal vacuum controller for a two-point calibration of multiple vacuum sources. It comes with a chemo resistant ceramic pressure sensor. The high-resolution TFT display ensures intuitive operation and navigation. The ventilation valve works even during a power outage and aerates the vacuum chamber. In addition to the manual mode, up to 10 programs can be saved, with up to 10 pressure/time sequences, even allowing for saving the last experiment run. It is possible to manage the experiment via labworldsoft (RS 232 interface) and to connect an external PT 1000 temperature sensor to measure the temperature of all applications. The knob also emergency stops the controller and aerates the vacuum chamber. The longevity of the valves is supported by the cleaning function which can be adjusted for every application. The operation of the vacuum controller is facilitated by a choice of languages (menu). The firmware of the device can be regularly updated with the free Firmware Update Tool (via USB).

 

Technical Data

Connection diameter suction side 8 mm
Connection diameter pressure side 8 mm
Connection diameter venting side 8 mm
Input pressure 1 - 1050 mbar
Boiling point detection yes
Solvent library yes
Two-point control yes
Analog speed vacuum control yes
Display TFT
Pressure unit / scale mbar, hPa, mmHg, Torr
Vacuum sensor yes
Vacuum sensor type ceramic Al2O3
Pressure max. for pressure sensor 1.6 bar
Measurement range (absolute) 1 - 1100 mbar
Control range 1 - 1100 mbar
Resolution pressure 1 mbar
Measurement uncertainty 1 mbar
Medium temperature (gas) 5 - 40 °C
Vacuum valve yes
Venting valve yes
Connection for ext. temperature sensor PT1000
Temperature unit °C / °F
Temperature measuring range -10 - 200 °C
Temperature measurement resolution 1 K
Accuracy of temperature measurement ±1 K
Timer yes
Time setting min. 1 s
Time setting max. 6000 min
Two dot vacuum control interface VC2.4
Vacuum speed control interface MVP 10 digital
Material in contact with medium Al2O3, PTFE, FPM, PPS
Housing material PBT
Fastening stand / clamp
Fastening diameter 16 mm
Mode automatic yes
Mode manual yes
Mode pump % yes
Mode program yes
Dimensions (W x H x D) 95 x 150 x 110 mm
Weight 1.284 kg
Permissible ambient temperature 5 - 40 °C
Permissible relative humidity 80 %
Protection class according to DIN EN 60529 IP 20
RS 232 interface yes
USB interface yes
Voltage 100 - 240 V
Frequency 50/60 Hz
Power input 24 W
Power input standby 2 W
DC Voltage 24 V=
Current consumption 1000 mA