*Listing is for drive motor only and does not include stand or disperser shaft. See our shaft selection guide or contact us for help with your application.
High quality and high power
Looking to homogenize large volumes quickly and efficiently? Look no further than the Goldleaf Scientific X1740 Homogenizer. This powerful machine can handle volumes from 500ml to 20 liters, and comes equipped with a 1700-watt drive motor for speeds of up to 23,000 rpm. Whether you're in the lab or the pilot plant, this homogenizer has got you covered.
Sealed ceramic disperser shafts are resistant to sticky or abrasive materials
Modular disperser shaft homogenizer system allow the user to build a complete homogenizer for their specific application (see our shaft selection guide below). The uses and applications range from fine emulsions to crushing and disintegrating solids. The range and scope of applications are extensive, but a few have been listed below
- Fine -mostly water based emulsions, or decreasing particle size for increased bioavailability and pharmaceutical efficiency of drug compounds (making compounds smaller and water soluble)
- Low Viscosity -light lotions, creams or soaps
- Viscous- Heavy and thick oils, blending terpenes into vape carts (see our guide on that process here)
- Knife-Breaking up solids (from loose agglomeration to bone)
In combination with our DK 40 flow chamber, it can also be used as an in-line disperser or to convey media. The DK40 is perfect for larger volume processing or where flow speed should be controlled. Compatible with the T/G 30 and T/G 40 disperser shafts.
T = shaft with PTFE stock: This shaft type is for standard applications (for liquid media such as water, oil, etc.) suitable . Do not run dry.
G = shaft with mechanical seal. This type of shaft is very suitable for aggressive or abrasive media when pressure is built up (e.g. with viscous media) or when solids are to be crushed.
Get great support and customer service!
Goldleaf Scientific has a dedicated repair center with parts in stock and knowledgeable representatives to quickly repair or ship you the part you need to get back up and running in 48 hrs or less
| Speed range [1 / min] |
2,500 - 23,000 |
| Speed range [1 / min] 115V version |
2,500 - 23,000 |
| Motor power [W] |
1,800 |
| Digital display type |
- |
| Speed display |
- |
| Volume, max. (H2O) [l] |
500 |
| Flow rate (H2O) [L / min] |
80 |
| Chamber cooling |
Yes |
| Inlet and outlet openings, diameter [mm] |
20th |
| Cold chamber connections, diameter [mm] |
10 |
| Noise without tools, max. [dB] |
87 |
| Dispersing tools |
"T 30 / G 30, T 40 / G 40, DK 30 / DK 40 |
| Power supply [V] |
115VAC 60Hz |
| Weight [kg] |
4.7 |
| Height [mm] |
360 |
| Diameter [mm] |
100 |
| Degree of protection according to DIN EN 60529 |
IP20 |
| Overheating protection |
Yes |
| Overload protection |
Yes |
| Motor type |
DC |
| Direction of rotation agitator shaft |
CCW |
| Operating mode |
Short-term operation |
| Certification |
CE |
X 1740 Manual
Shaft Selection Guide
*Listing is for drive motor only and does not include stand or disperser shaft. See our shaft selection guide above or contact us for help with your application.
