SKU: | SSP-TRI600 |
Goldleaf Scientific recommends tightening all Standard Pressure Clamps (Non-High Pressure) to finger tight and then use either a screwdriver or wrench to tighten them 2 full turns. It is not recommended to overtighten the clamp and bottom it out as this will cause the gasket to be over-compressed and put too much tension on the clamp threads, which could cause it to fail.
Sizes Available:
Specifications:
Sizes | Maximum Pressure @70F (PSI) | Maximum Pressure @250F (PSI) |
1.5" | 500 | 250 |
2" | 450 | 250 |
3" | 350 | 150 |
4" | 200 | 125 |
6" | 150 | 75 |
8" | 100 | 50 |
10" | 40 | 30 |
12" | 30 | 25 |