CC-K6 110V 1~ 60Hz

Brand: Huber

Create your own review

Add to favorites

Share this product

Information

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfill the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear.

The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favorites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission.

	Pilot ONE controller with Plug & Play technology
	Precise temperature control
	5.7“ touchscreen and comfortable menu navigation
	Overtemperature and low level protection
	Safety class III/FL (DIN 12876)
	Powerful pressure/suction pump
	Programmer with calendar and clock functions
	2-point calibration
	Pt100 sensor connection
	E-grade "Professional" included

Temperature

Range	-25 to 200 °C
Stability	±0.02°C
Control	True adaptive control

Safety

Class	III/FL
Protection class	IP20

Heating/cooling

Heating Capacity	2 kW
Cooling Capacity	at 20°C/.2 kW, at -20/.05 kW
Cooling	Air cooled
Refrigerant	R290

Circulation pump

Pressure pump max	27 L/min at .7 Bar
Suction pump max	22 L/min at .4 Bar
Connection	M16x1 AG male
Viscosity	50 mm^2/S

Connections

Pt100 connection	Pt100
data connections	RS232, Ethernet, USB Device, USB Host

Operating specs

Functioning temperature range	5 to 40 °C
Noise level	57 dB(A)
Bath opening WxD/BD	140 x 120 / 150 mm
Bath volume	4.5 L
Power supply	110V, single phase power
Current max.	10 + 1.35 A

Miscellaneous

Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.