KISS 202C 110V 1~ 60Hz

Heating circulation thermostats are specially designed for temperature control of externally attached applications with a small volume. The units are fitted with bath tanks made of stainless steel or polycarbonate. The thermostats have M16x1 pump connections at the rear side as well as a stainless steel bath cover with a filling opening. All models are fitted with an overtemperature and low level protection system according to safety class III/FL (DIN 12876) for use with flammable fluids. A powerful circulation pump ensures optimal heat transfer to external attached applications.

 The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).

	KISS temperature controller
	Bright, large OLED display
	Simple operation with menu navigation
	Simultaneous display of setpoint, Tmin, Tmax and actual temperature
	Status displays for pump, cooling and heating
	Overtemperature and low level protection
	Safety class III/FL (DIN 12876)
	USB and RS232 interfaces
	Autostart function for power failure
	3 color versions available: grey (standard), blue, red

Temperature

Display

Safety

Heating/cooling

Circulation pump

Connections

Operating specs

Miscellaneous

Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.

Product datasheet

Heat-up curve

Pump curve

KISS brochure

3-year manufacturer’s warranty.

Register this unit on www.huber-online.com to activate your 3-year manufacturer’s warranty.