Heating circulation bath thermostats with baths made from polycarbonate or stainless steel are simple to use and are suitable for many applications such as: sample temperature control, analysis, materials testing or checking food. The units offer high temperature stability and are fitted with overtemperature and low level protection suitable for Safety Class III/FL (DIN 12876) for use with flammable fluids. A powerful pressure/suction pump ensures optimal circulation and temperature homogenity in the bath and also allows temperature control of externally attached applications using a pump adapter (accessory). The products are rounded off with a range of accessories including inserts, variable adjustable platforms, bath covers, probes as well as hoses, temperature control fluids and various adapters.
The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).
|KISS temperature controller|
|Bright, large OLED display|
|Simple operation with menu navigation|
|Simultaneous display of setpoint, Tmin, Tmax and actual temperature|
|Status displays for pump, cooling and heating|
|Overtemperature and low level protection|
|Safety class III/FL (DIN 12876)|
|USB and RS232 interfaces|
|Autostart function for power failure|
|3 color versions available: grey (standard), blue, red|
|General information & temperature controller|
|Temperature range||(-30) 25...200 °C|
|Temperature stability||±0.05 °C|
|Temperature display||OLED Display|
|Alarm message||optical, acoustical|
|Safety class||III / FL|
|Dimensions (W x D x H)||350 x 375 x 375 mm | 13.78 x 14.76 x 14.76 inches|
|Weight||11 kg | 24.26 pounds|
|Heating / cooling capacity|
|Heating capacity||1-1,5 kW|
|Pressure pump max.||14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi|
|Suction pump max.||10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi|
|Pump connection||M16x1 AG male (Option, #19607 )|
|Digital interface||USB, RS232|
|Permissible ambient temp.||5...40 °C|
|Bath opening W x D / BD||290 x 152 / 150 mm | 11.42 x 5.98 / 5.91 inches|
|Bath volume||12 Liters | 3.17 gal|
|Filling volume min.||12 Liters | 3.17 gal|
|Power supply||100-115V 1~ 50/60Hz|
Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.
Please observe the notes on installation and/or the space requirements of our products.
The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%
Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.
We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.