Huber - KISS K6 110V 1~ 60Hz

Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfill the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear.

 The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).

 

KISS temperature controller  
Bright, large OLED display  
Simple operation with menu navigation  
Simultaneous display of setpoint, Tmin, Tmax and actual temperature  
Status displays for pump, cooling and heating  
Overtemperature and low level protection  
Safety class III/FL (DIN 12876)  
USB and RS232 interfaces  
Autostart function for power failure  
3 color versions available: grey (standard), blue, red  

 

Temperature

Range -25 to 200 °C
Stability ±0.05°C
Display OLED

Display

Alarm Optical, Acoustical
Controller KISS

Safety

Class III/FL
Protection class IP20

Heating/cooling

Heating Capacity 2 kW
Cooling Capacity at 20°C/.2 kW, at -20/.05 kW
Cooling Air cooled
Refrigerant R290

Circulation pump

Pressure pump max 14 L/min at .25 Bar
Suction pump max 10.5 L/min at .17 Bar
Connection M16x1 AG male

Connections

Pt100 connection Pt100
data connections USB, RS232

Operating specs

Functioning temperature range 5 to 40 °C
Noise level 57 dB(A)
Bath opening WxD/BD 140 x 120 / 150 mm
Bath volume 4.5 L
Power supply 110V, single phase power
Current max. 10 + 1.35 A

 

 

Miscellaneous

Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.

 

Product datasheet
Heat-up curve
Cool-down curve
Pump curve
KISS brochure

 

3-year manufacturer’s warranty.

Register this unit on www.huber-online.com to activate your 3-year manufacturer’s warranty.