Huber - Minichiller 300-H OLE 115V 1~ 60Hz

The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 liters of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants. 

 The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).

 

Environmentally-friendly, economic cooling solution  
High efficiency  
Precise temperature control  
Simple operation with menu navigation  
Robust stainless construction  
Reliable continuously operation with warning functions  
Easy to fill and empty  
Illuminated filling level indicator  
Bright, large OLED display  
USB and RS232 interfaces  

 

 

General information & temperature controller

Range -20 to 100 °C
Stability ±0.2 °C

Display

Resolution 0.01 °C
Alarm Optical, Acoustical
Controller OLÉ

Safety

Class III/FL
Protection class IP20

Heating/cooling

Heating Capacity 1 kW
Cooling Capacity at 15°C/.3 kW, at -20/.07 kW
Cooling Air cooled
Refrigerant R290

Circulation pump

Pressure pump max 14 L/min at 0.25 Bar
Suction pump max 10.5 L/min at 0.17 Bar
Pump connection M16x1 AG male

Connections

Digital interface USB, RS232

Operating specs

Functioning temperature range 5 to 40 °C
Noise level 51 dB(A)
Filling volume min 1.4 L
Volume of expansion 2.6 L
Power supply 115V, single phase power
Current max. 13 A
Fusing 16 A

 

 

Miscellaneous

Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

Please observe the notes on installation and/or the space requirements of our products.

The following voltage and frequency tolerances apply based on EN60034-1:
Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.

 

Product datasheet
Pump curve

 

3-year manufacturer’s warranty.

Register this unit on www.huber-online.com to activate your 3-year manufacturer’s warranty.