Vacuum Pump Flushing Fluid

DISCOUNTS ON MULTIPLE BOTTLES

Buy 2 Quarts = 15% Off

Buy 4 Gallons = 15% Off

Flushing Fluid for vacuum pumps greatly enhances the cleanliness of your pumps internals. Even when pump oil is changed regularly, contaminants, internal lubricants, and sediment can build in a vacuum pump creating damaging particles and sludge that can hinder a pumps performance. 

Prevent unwanted maintenance and repairs by regularly cleaning your pump with flushing fluid whenever the oil is replaced. Viscosity of flushing fluid loosens contamination from internal parts for it to be easily drained out. 

1. When it is time to change pump oil (every 3 months), drain the pump of the current oil

2. Fill with Flushing Fluid at regular levels and run the pump for 10 minutes

3. Drain flushing fluid and refill with new, clean vacuum pump oil 

Specifications: 

• Vapor Pressure: < 1 x 10-4 Torr
• Viscosity @ 100 ºF: 25.3 cSt / 120.3 SUS
• Viscosity @ 200 ºF: 4.4 cSt / 40 SUSo
• Flash Point: 180ºC / 356ºF
• Pour Point: -12ºC / +11ºF
• Specific Gravity: 0.86 g/ml